What do you need to pay attention to when choosing food plastic buckets?

1. Material

1. Food grade materials:

It is essential to ensure that plastic drums are made of non-toxic, odorless, corrosion-resistant food-grade plastic. Common food-grade plastics include 

polyethylene (PE), polypropylene (PP) and high-density polyethylene (HDPE). These materials will not release harmful substances under normal conditions

 of use and will not cause contamination of food.

When choosing, you can consult the product manual or consult the manufacturer to ensure that the material of the selected food Plastic  buckets meets

 food safety standards.

2. Avoid harmful substances:

Bisphenol A (BPA) is a chemical commonly used in the manufacture of plastics and plastic coatings, but studies have shown that it may have negative effects 

on human health, especially on the endocrine system.

Therefore, when choosing food Plastic buckets, you should avoid choosing Plastic food buckets containing BPA. In addition, you can also pay attention to the

 label or description of the product to confirm whether it contains other chemicals that may be harmful to the human body.

Second, wall thickness

1. Uniformity: 

The wall thickness of the food bucket should be evenly distributed to ensure the strength and stability of the rubber bucket body. Uneven wall thickness may 

cause deformation or rupture of the barrel when subjected to external forces.

At the time of purchase, the uniformity of the wall of the plastic drum can be checked by observation and touch. If available, a measuring tool can also be used

 for more accurate inspection.

2. Moderation:

The thickness of the wall of the food Plastic food bucket should be moderate, neither thin nor thick. Too thin a barrel wall may not withstand enough pressure

 or impact, while too thick a barrel wall may increase cost and weight.

When selected, the appropriate barrel wall thickness can be determined according to the required storage and transportation conditions. For example, for occasions

 requiring greater pressure or impact, thicker barrel walls can be selected; For lightweight and cost control occasions, you can choose a thinner barrel wall.

3. Sealing performance of food Plastic food bucket.

1. Close coordination:

The lid of the plastic drum should be closely coordinated with the body of the barrel to prevent liquid leakage and external pollution. This can be determined by

 looking at the size of the gap between the lid and the body of the barrel.

At the time of purchase, you can try to cover the barrel tightly and gently shake the barrel body to check for leaks.

2. Rubber drum sealing gasket:

The sealing gasket is the key component to ensure the sealing performance of the plastic drum. It should have good elasticity and wear resistance to ensure that 

it will not age or be damaged during long-term use.

When selecting, you can check the material and quality of the sealing gasket and ask the manufacturer for information about its service life and replacement cycle.

Fourth, weather resistance

Uv resistance:

For food buckets that need to be exposed to sunlight for a long time, plastic materials with UV resistance should be selected. This kind of material can reduce the

 damage of ultraviolet light to the barrel and prevent deformation and cracking.

Food Plastic food bucket high and low temperature resistance:

Choosing a plastic material that can remain stable over a wide temperature range ensures that the plastic food bucket will maintain its performance in different temperature

 environments. For example, in cold areas, materials that can withstand low temperatures without deformation should be selected; In hot areas, materials that can 

withstand high temperatures without softening should be selected.

5. Product identification and certification

Manufacturer Information:

When buying a snack bucket, check whether the bucket is marked with the manufacturer's name, address and other basic information. This information helps to 

trace the source and quality of the product to ensure that the food Plastic food bucket purchased is a qualified product of a regular manufacturer.

Material and temperature range:

Confirming the material and temperature range of the plastic drum is essential to ensure food safety and storage requirements. This information is usually indicated

 in the product manual or on the barrel body and should be read and understood carefully.

Quality safety certification:

Priority is given to plastic drums that have passed relevant international or domestic quality and safety certifications, such as ISO, FDA and other certification marks. 

These certification marks indicate that the product has passed rigorous quality testing and safety assessment, and can be used with greater confidence.

The above content is a preliminary introduction to the Plastic food bucket factory. If you need to know more about the Plastic food bucket in the future, you can contact us 

https://www.cpplasticbucket.com/